Concrete Parking Lots in the City of Albuquerque, NM

Work in Albuquerque is permitted through the City of Albuquerque, which sets its own process separate from neighboring jurisdictions. New lots and significant reconstructions commonly require site plan, grading and drainage review, and accessibility compliance with the governing jurisdiction. Smaller in-kind repairs may need less, but confirm requirements with your city, county or village before work is scheduled. We confirm the requirements for your address during the estimate rather than guessing.

Caliche hardpan: Caliche under a lot can trap stormwater beneath the pavement, softening the base and causing localized failures. We grade the subgrade to drain, consider underdrains or breaking through the hardpan at low points, and keep bearing consistent across caliche transitions. Collapsible soil: Collapsible soils can settle under a lot once drainage concentrates water at inlets, curb openings or retention areas. We moisture-condition and recompact the subgrade, compact carefully around drainage structures, and make sure water is carried off the site rather than soaking in next to the pavement. Expansive clay: Clay pockets under a parking lot can heave panels and create trip edges, especially near landscaped islands that are irrigated. We over-excavate or treat clay zones, use drip irrigation or xeriscape in islands, and keep landscape water away from pavement edges.

Small lots or pads may be completed in about a week; larger lots done in phases commonly take several weeks, depending on size, drainage work, phasing and weather, with cure time before each section reopens. Monsoon season (roughly July through September) can interrupt excavation and pour days with afternoon storms, so summer schedules usually build in weather flexibility and favor early starts.

Accessible parking spaces, access aisles, curb ramps and accessible routes must comply with ADA standards and local code, including limits on slope. We build to the approved site plan and specifications for the project, and for renovations we recommend having the design reviewed so the finished work meets current requirements.